ALAV104T-UK Adder T3AV AV100 Series Extender 4 Way UTP Transmitter only with UK leads
( 4 x UTP Transmitter )
ALAV 104T top PIC
Description:
ALAV104T-UK Adder T3AV AV extender 4 x Line Transmitter with UK leads. AdderLink AV 104T transmitter only. Extends a single high resolution video and high fidelity audio signal to 4 different receivers Local port to connect local screen and speakers or to cascade to other AdderLink AV 104T transmitter units AdderLink AV Series High-resolution video and superb quality audio distribution for Digital Signage and Media Streaming applications. The AdderLink AV Series is a range of audiovisual extenders delivering high video resolutions and superb quality audio up to 300m using standard CATx cable (x=5,5e,6,7). The innovative design allows for flexible audiovisual distribution that can be expanded to grow in line with project developments. The AdderLink AV range of audiovisual extenders allow for the real time delivery of high quality multimedia content over long distances. Using the AdderLink AV avoids the prohibitive costs of fibre optic cabling, displays with built in CPUs or locating a CPU next to each screen. Allowing for the creation of flexible distribution architectures, the AdderLink AV ensures direct delivery of crystal clear communication with consumers at the point of decision. Consisting of 4 interchangeable units, the AdderLink AV Series makes the design of digital signage and narrow casting applications cost effective, flexible and easy to plan.
Features:
Extends video and audio across a single CATx cable
Extra fine video quality at resolutions up to 1600 x 1200 at 200m and 1280 x
1024 at 300m
High fidelity clickless digital audio (16bit, 44.1 kHz, stereo)
Fine, independent sharpness and brightness control
DDC support
Integrated state of the art 300MHz DeSkew with 62ns full scale & 2ns
granularity (AV101R only)
Feed through / cascade port at transmitter
Dual video and audio outputs at receiver
Use stand alone or rack mount 16 modules across 3U
Advanced spike suppression circuits for reliability in noisy installations
All metal construction
Power / video indication confirm correct operation
Adder/pics/ALAV 104T with 4 x 100RX Setup PIC.jpg
Specification:
Video Resolutions - 1600 x 1280 at distances up to 200 metres/650 feet, 1280 x
1024 at distances up to 300 metres/1000 feet.
Extension distance - Up to 300 meters/1000 feet using CATx (x=5,5e,6,7).
Extension technology - Differential analogue signalling for video signals.
Cable Equalisation - Finely adjustable cable equalisation amplifiers enable the video
sharpness and brightness to be independently adjusted using the dials on the side of
the receiver units.
Integral DeSkew (AdderLink AV101R only) Skew compensation adjustments
can be made using the two rotary dials on the AdderLink AV101R receiver unit. The
first dial affects the relationship between green and blue colour signals, the second red
and green. The cable skew is produced due to wire length differences between
different twisted pairs in a CATx cable that arise due to the different twist rates used
to reduce signalling cross talk. The amount of cable skew seen depends on the cable
type used and the cable length. The AdderLink AV101R provides up to 62ns of
DeSkew with a fine 2ns resolution. This means that high-resolution video can be
accurately DeSkewed even at long cable distances. The DeSkew supports 300MHz
bandwidths, which means that the DeSkew function does not adversely affect the video
quality.
Indicators - The remote and local units are fitted with two indicators; red shows the
presence of power into the module, green indicates the presence of a video input.
Audio - Transmitted as digital signals to ensure high fidelity and low noise levels.
Phase locked sampling clocks ensure that there are no unwanted clicks when no sound
is being played.
Rack mount options Both the local (computer-end) and remote (display-end) units
may be rack mounted in the AdderLink AV Series rack mount chassis. The chassis
enable 16 units to be mounted in 3U of 19-inch rack space. The units are rack
mounted using the optional rack mount faceplate.
Connectors (AdderLink AV 100T) -1 x blue 15-pin high-density D-type female
connector for video input and 1 x light green 3.5mm audio jack for audio input. 1 x
blue 15-pin high-density D-type female connector for video output and 1 x light green
3.5mm audio jack for audio output or cascade to additional AdderLink AV 100T. 1 x
RJ45 connector for CATx cable connection. 2.5mm DC jack for power adapter.
Connectors (AdderLink AV 100R) - 2 x blue 15-pin high-density D-type female
connector for video output and 2 x light green 3.5mm audio jack for audio output. 1 x
RJ45 connector for CATx cable connection. 2.5mm DC jack for power adapter.