UPT-RPM1 UPTIME DEVICES Remote Physical Monitor 1 Environmental Monitoring IP Access Base Unit ( + Env Sensor Hub )
Remote Physical Monitor
Description:
The RPM is the new standard in physical and environmental monitoring devices designed to monitor temperature, humidity, airflow, water, voltage, current, motion, smoke, and contact closures and notify personnel when those conditions exceed user-defined limits. The RPM can also control power outlets. The RPM relies on new Remote Intelligent Multi Sensors (™ Pending), RIMS, that not only make environmental and security readings but can store those readings as well. Each RIMS is a Daisy Chain Sensor™, so multiple RIMS can be plugged into one RPM sensor port. RIMS can be up to 1000 ft. away from the RPM with no external power needed. Because each RIMS can make and store its own readings there is no data logging delays. Each RIMS has a battery backed clock so you can be assured each data point is properly recorded. . RIMS generate events when internally monitored thresholds are broken. There are four RIMS models: Temperature/Humidity/Airflow/Dry Contact RIMS • Accuracy to 0.1 • Monitor Temperature (Celsius, Fahrenheit, or Kelvin scale) • Humidity • True airflow readings • Dry contact sensor can auto detect smoke, water, security, and motion sensors • Dry output sensor that can change state on alarm Voltage RIMS • Power on/off/reboot 120V-250V x 2 power outlets • Monitor current draw on each outlet • 2 IEC Connections • Change in RIMS power does not change outlet state • Each outlet is independent • Each outlet can change state on other sensor events • Temperature sensor included Dry Contact RIMS (10 Port) • Monitor dry inputs • Auto detect Smoke, Water, Security, Motion sensors • Temperature sensor included RS-232 RIMS • Web-Enable to Monitor & Control approved manufacturers’ power strips • Temperature sensor included
Features:
Features and BenefitsLCD Screen makes critical
information available at a glance:• Sensor status
• Sensor value
• Alarm logs
• Network settings
• PoE (Power over Ethernet)• IEC power connection
• DB-9 external SMS Modem
connection
• Audible AlarmRequires No SoftwareNetwork connectivity
• Supports SNMP v1, v2, v3
• Web access (HTTP)
• Supports DHCP
• SNTP – Simple network time to
keep log times accurate
• Authenticated E-mail notification
• SNMP traps – Multiple trap
destinations Four user-defined thresholds
for each RIMS:
• High critical
• High warning
• Low warning
• Low criticalFull password protectionSuperior graphing capability1 U of rack space required
(19” or 24”)
Remote Physical Monitor typical setup
Specification:
Power Requirements Input 120-240 VAC, 50/60 Hz
Mounting 19” or 24” 1U or Desktop
Ambient Operating Environment, °F (°C) -55°C to +125°C (-67°F to +257°F, 218°K to 398°K)
10-90% RH non-condensing
Communications HTTP, SNMP V1/V2c/V3,DHCP,SMTP,DNS,SNTP
Network Interface RJ45 10/100 Base-T connector, MDX auto detect
SMS Modem Selectable baud rate, Alpha numeric SMS
Agency Listings FCC Class A, CE, UL
LEDs Power, Probe Status, PoE, Ethernet Activity, Sensor Tx, Sensor Rx
RIMS Temperature/Humidity/Airflow/Dry Contact RIMS Temperature with ranges -67°F to +257°F (-55°C to +125°C, 218°K to 398°K) Humidity with ranges 0 to 100% RHAirflow
Dry Contact -
(Auto Detect Smoke/Water/Security/Motion) Normally Open / Normally Closed
RS-232 RIMS Web Enable and Auto Detect approved manufacturers’ power strips Temperature with ranges -55°C to +125°C (-67°F to +257°F, 218°K to 398°K)
Voltage RIMS Input 120-240 VAC, 50/60 Hz Output 120-240 VAC, 50/60 Hz Temperature with ranges -67°F to +257°F (-55°C to +125°C, 218°K to 398°K)
10 Port Dry Contact RIMS Dry Contact -
(Auto Detect Smoke/Water/Security/Motion) Normally Open / Normally Closed Temperature with ranges -67°F to +257°F (-55°C to +125°C, 218°K to 398°K)