Rose CNV-DVIVGA Rose DVI-VGA Analogue Converter dongle. This converter allows the use of an Analog VGA Monitor direct from the Digital DVI graphics signal supply( DVI Socket - VGA Plug )

Rose Convertor CNV-DVIVGA

Description:

Rose Electronics® DVI to analog (VGA) converter for problem solving applications. The DVI to analog converter is a unique product that converts your PC’s digital video output to an analog signal. This allows you to use your existing VGA monitor. The DVI to analog converter can be custom programmed to match your existing configuration (DVI and VGA resolutions needed). Custom programming the converter provides the best, clearest display.

Features:

 Supports resolutions up to 1920 x 1200, 1080p
 24 pin single link DVI input connector (female)
 15 pin D-sub output connector (male)
 Compatible with DVI standards by DDWG
 HDCP Compliant
 Custom configurations available

Specification:

Specifications
Part Number CNV-DVIVGA
Video Bandwidth 1.65 Gbps (Single link)
Resolution (Max) 1920 x 1200 (WUXGA), 1080p
Connectors Input: DVI 24 pin female
Output: 15 pin D-sub (male)
Length 13.8” (350mm)
Power Consumption 0.54W (Max)
Power Adapter +5VDC (Optional)
Environment
Operating temp. 32 to 122° F (0 to 50° C)
Storage Temp. -4 to 158° F (-20 to 70° C)



Installing the DVI to analog converter is a very easy and simple process.
1. It is recommended that you power down the PC the converter will be
connected to.
2. Connect the converter’s DVI connector to the DVI source using a
user supplied DVI cable.
3. Connect the VGA monitor cable to the HD15M connector on the
DVI to analog converter
4. Optionally connect the +5VDC power adapter to the converter
if adequate power is not available from the PC’s DVI connector
5. Power on the monitor, then boot the computer.