MC-PRO-100-LX PROLABS 100BASE Media Converter+SFP RJ45 to LC LCSM 15km
100 Base SFP 1310NM Singlemode 15km
Media Converter General Picture
Actual model may look slightly different depending on loaded SFP.
Description:
ProLabs Auto Sensing 10/100/1000 to 100/1000 (SFP Required) copper to fibre Media converter - Enables network extension over fibre with SFP pluggable Optic - Flexible solution accepting a wide range of SFPs: FE, GbE, BiDi, WDM - Multi-rate device supporting 10/100/1000 on the copper side and 100/1000 (dependant on SFP) on the fibre side - Robust product with comprehensive 3 year warranty - Bundled options available
Features:
Key Features:
- Comply with IEEE 802.3
10Base-T, IEEE
802.3u - 100Base-TX, 100Base-FX, IEEE
802.3ab - 1000Base-T, IEEE 802.3z -
1000Base-SX/LX/ZX Ethernet standard (Max
distance 120Kms)
- Bridge mode Media Converter with TP port
supports 10/100/1000Base-T and auto-MDI /
MDIX
- Auto-Negotiation for 10/100/1000Base-T;
Half-duplex or Full-duplex for 10Mbps and
100Mbps, full-duplex for 1000Mbps
- LED indicators for simple diagnostics and
management
- Provides DIP switch for LFP function (Disable
/ Enable) setting
- Compact in size, easy installation
- OAM (TS-1000 and IEEE 802.3ah) supported
- 9K Jumbo frames supported
ProLabs
Specification:
Product Specifications
Model MC-PRO-1000AS-SFP
Connector - Fibre SFP, LC Type
Mode Vary on SFP module
Fibre Maximum
Distance
Vary on SFP module
Connector - Copper 10/100/1000Mbps RJ-45
Modes Full Duplex, auto-negotiation
Packet Forwarding
Rate (64bytes)
14880pps@10Mbps
148810pps@100Mbps
1488000pps@1000Mbps
LED indicators PWR, 1000, Fibre/LNK/ACT, TP/LNK/ACT
DIP switch LFP function (Disable/Enable) setting
Protocols and
Standards
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX, 100Base-FX
IEEE 802.3ab 1000Base-T
IEEE 802.3z m1000Base-SX/LX/ZX
Cable 10/100/1000Base-T:
1000Base-T-2-pair UTP Cat. 5/5e/6, up toT-2-pair UTP Cat. 5/5e/6, up to
100m
100Base-FX:
50/125μm or 62.5/125μm multimode fibre
optic cable, distance support varies on
SFP module.
9125μm single-mode fibre optic cable,
distance support varies on SFP module.
1000Base-SX:
50/125μm or 62.5/125μm multi-mode fibre
optic cable, distance support varies on
SFP module.
1000Base-LX:
9/125μm single-mode fibre optic cable,
distance support varies on SFP module.
1000Base-ZX:
9/125μm single-mode fibre optic cable,
distance support varies on SFP module.
OAM TS-1000, IEEE 802.3ah terminal
Jumbo Packet Size 9K
Dimensions 26 x 70 x 97mm (H x W x D)
Power External power adaptor 5V 2A max.
EMI Compatibility FCC Class A, CE Certification Class A
Temperature Storage: -10 to 70 degrees centigrade
Operating: 0 to 50 degrees centigrade
Humidity 5% to 90% non-condensing