KWX-ATS32A1H1 PDUeX Auto Transfer Switch ( KWX ATS ) 1U 32A, A&B input 32A IND309 - 1x 32Amp Output IND309 With Monitoring KWX-N1 Range
KWX-ATS32A1H1
Description:
KWX-ATS32A1H1 PDUeX Auto Transfer Switch 2 x 32Amp Inputs to 1 x 32A 309 outlets , 32 Amp Feed. Auto Transfer Switch with Dual 32 Amp input powers provide automatically redundant power protection. Built-in web server, manager can real time to monitoring the current consumption of the ATS. KWX Rack mount Automatic Transfer Switch (KWX ATS). Provides Fast A-B Switch over within 8- 12 ms, total Current Monitoring and Outlets Switching, delivers consistent power, to single-corded equipment. The KWX ATS has dual input power cords supplying power to the connected load. In the event where the primary power source becomes unavailable, the KWX ATS will flawlessly source power from the secondary source without interrupting critical loads. The KWX ATS has built-in network connectivity, which allows for remote management via Web, SNMP or Telnet/SSH interfaces, and provides sensors recognition, ability to cascade up to 4 units, power factor recognition, 2 x IEC60309 32A input Plug and 1 x IEC60309 32A IND Female Optional: temperature and humidity, smoke alarm, water logging alarm, infrared alarm, and door open alarm. Monitor: monitor the total current, monitor the total kWh, and monitor the input voltage, monitor environment temperature, monitor environment humidity, monitor environment smoke, monitor water logging, infrared monitoring, and door open monitoring. Alarm settings: total current over the limit, on the temperature limit, on the humidity limit, smoke alarm, and water logging alarm, infrared enters alarm, door open alarm. Dry connection
Features:
KWX-ATS: PDU Solution with embedded Environmental
High speed A/B Switch over with 8- 12 ms
Monitoring Technology
Monitor Temperature and humidity,
Monitor Smoke
Monitor Water logging
Infrared Monitoring
Door open Monitoring
Specification:
1. Item Description
2. Product series PN-ATS-1
3. Product Size W x D x H= 19“ x 248 x 44.45 mm
4. Mounting
length
465 mm
5. Case color Black
6. Socket type 1x
2P+E (32A) CEE form Male
Cable: 3*6.0mm2*2m
Two Input
A&B
2P+ E (32A) CEE form Female
Cable: 3* 2m
7. LED display
Input/output voltage
Total load current
Power supply A or B line operating state
8. Function
Automatic switch over power A and power B
Overload alarm When over the 32A threshold both the ATS alarm and the LED display will be activated
Switching time (From "A" to "B" line): 8 ms ≤ 12 ms
Function Illustration Parameter Note
Working voltage Normal working AC90~250V
Input/output current Max input/output current 32A
Working band Under normal working 47~60Hz
Access
port
Net port Via WAN or LAN monitor access 10/100Mb
Adaptive Networking
Serial port Via Serial port monitor access RS485 port
Sensor port Sensors access RS485 port
Access way
HTTP/
HTTPS Web browser access Adapt IE、Fire Fox inner core browser,
support SSL;
TELNET Simple command lines access /
SSH Encryption command lines access Support SSHV2 version
SNMP Support SNMP for centralized monitor Adapt SNMP v1、V2
Operation system
compatibility Support various operation system Windows/winsta/win7/linux etc.
Secondary development
Used for system integrate Opening protocol TELNET、SSH
RS485 Customized protocol
KWX- ATS Specification
3
Software upgrade
Manage software load Support manage software upgrade
Software on circuit Support software upgrade on the circuit of
hardware
Control
Control each outlets on/off Each outlet breaking capacity 16A 250VAC
Sequential power on/off
The interval of sequential power off time:
0.5s, Sequential power on 1~250s,
user-defined
Power status holding When PDU restart power, Each outlets will
remain the status before
Monitor
Monitor the input voltage
Resolution:1V
Accuracy: ±1%+1 digit
Meter range: 90~350V
Monitor the total current
Resolution: 0.1A
Accuracy: ±1%+1 digit
Meter range: 0.1~40A
Monitor the total kwh Resolution: 0.1KW·H
Accuracy: 1 grade
Monitor Environment Temperature
Resolution: 1℃
Accuracy: ±1%+1 digit
Meter range: -30~100℃
Optional
Monitor Environment Humidity
Resolution: 1%
Accuracy: ±1%+1 digit
Meter range: 01~99%
Optional
Monitor Environment Smoke Max: 25 ㎡ available Optional
Monitor water logging Water logging or drop monitor Optional
Infrared monitoring The max monitor distance: 16m Optional
Door open monitor Min. 5mm open distance available Optional
Surge protection failure monitor PDU still normal working when failure Optional
Alarm limit setting
Total current limit
Auto identify limit rationality
Temperature limit
Humidity limit
Outlets alarm
Total current over limit alarm
PS/PN series local alarm ways: PDU
buzzer alarm, sound and light alarm, Dry
connect;
PN series remote alarm: E-mail, SMS,
SNMP TRAP, WEB page notice,
TELNET/SSH notice
Temperature over limit alarm Optional
Humidity over limit alarm Optional
Smoke Alarm Optional
Water logging alarm Optional
Infrared enter alarm PN series remote alarm: E-mail, SMS,
SNMP TRAP, WEB page notice,
TELNET/SSH notice
Optional
Door open alarm
Display, Indicate
Outlets indicators Each outlets with a indicator
6 digital indicators
Nixie tube show the current/voltage,
inquiry products information, Alarm
information;
Manu button operation
Inquiry information Inquiry product information, Alarm
information, current etc.
On/off Alarm sound, Dry connect
Close/ open alarm sound and dry connect
output, Dry connect have normal open/off
two choice, passive, touch spot can connect
2A 250VAC
Log record Alarm log Alarm log circle, Inquiry, export, stock,
delete available
Management
User right limit Administrator, Normal user
Outlets grouping Make group over PDU self sockets limit
clock synchronization Regulate PDU system clock
KWX- ATS Specification
4
Intelligent recognition
Outlets recognition Automatic read the sockets type and
numbers
Sensors recognition Sensors port no need be defined, Automatic
read the sensors type and numbers
Limit recognition When over limit, setting failure
The MAX output current and PDU power Help user to limit facilities connect number
and type
Power factor recognition
Help user to know the current consuming
apparatus
Sensors in 1 ~ 8pcs same or different sensors connect in one
PDU
Flexible sensor input, extend and choose,
Customized for new sensors Optional
Cascade chain
PN with PN Cascade Directly connection via net cable;
Via HUB ，4 sets Cascade at most
PN with PS Cascade Directly connection via net cable, 4 sets