Smart-e SDS-1005 30m Wall plate transmitter and receiver pair for HDMI, RGBHV, Audio, RS232, USB and Ethernet, providing inline power to 30m

SDS-1005

Description:

Flexible and comprehensive wall plate solution for display installations using Cat 6-8 STP/FTP cable The SDS-1005 is a flexible and cost effective solution to extending HDMI, RGBHV, stereo audio and USB. Consisting of a transmitter/receiver pair, the input signals can be connected via a convenient wall plate (double gang UK size), whilst the receiver unit can be installed up to 30m away. Distribute high resolution HDMI and RGBHV signals together with audio and USB over 3 x CAT 6-8 screened twisted pair cables The SDS-1005 uses standard CAT 6-8 STP/FTP cable which is flexible, narrow in diameter and low cost. The cables can fit into small trunking and can be terminated easily with standard RJ45 connectors. The system can transmit a mix of signal types simultaneously, consistent with installing a plasma, LCD or projector in Boardrooms, lecture halls and classrooms. The system requires 3 x CAT 6-8 STP/FTP cables and can extend the signals up to a distance of 30m. The SDS-1005 transmits HDMI signals up to 1080p @60Hz, computer resolutions up to UXGA (1600x1200), stereo audio and has USB V1.1 connectivity. Selection of the signal type can be via the Auto sense feature, RS232 or button control on the wall plate. The receiver unit can be programmed with RS232 command strings to tell the display device which signal type has been chosen.

Features:

• Uses easy to install, inexpensive CAT cable
• Outputs reach up to 30m
• Support HDMI up to 1.65 Gbps
• HDCP/EDID/DDC transparent link
• HDMI resolutions 1080p @60Hz, 3D
• RGBHV resolutions up to UXGA
• Supports USB V1.1
• Ideal for human interface devices (HIDs)
• 12Mbps full speed
• 3 x CAT 6-8 STP/FTP cables
• Supplies remote power to wall plate
• High ground loop immunity
• Button control & auto sense
• Compact receiver units
• Stereo audio
• Store RS232 codes for input selection
• Plug and play
• DVI and DisplayPort compatible

SDS-1005 typical setup

Specification:

Connector
HDMI type B
Connector
HdB15 socket
Signal formats
HDMI/DVI/DISPLAY PORT
Signal formats
RGBHV, YPrPb, Y/C, CV
Video resolutions
1080p @60Hz, 3D w/Deep Colour
Video resolutions
UXGA (1600 x200) @60Hz
HDCP/DDC/EDID
Transparent connection
DDC/EDID
Transparent connection
HDMI
Computer
Version
V1.1
Connector
3.5 mm jack socket
Maximum speed
Full speed 12Mbps
Signal formats
Analogue audio
Connector transmitter
Type B
Bandwidth
20-20kHz
Connector receiver
Type A