PDUMH20HVAT Tripp-Lite Single-Phase (ATS) Auto Transfer Switch / Metered PDU, 3.2-3.8kW 16/20A 200-240V, 1U Horizontal Rackmount, 8x C13 and 2x C19 outlets, 2x C20 inputs

PDUMH20HVAT

Description:

Single phase 16/20A 200-240V Auto Transfer Switch / ATS PDU Enables redundant-power option for single-corded network devices Separate primary & secondary inputs connect to any two compatible power sources 1U horizontal rackmount; 2 C20 inputs; 8x C13 and 2x C19 outlets Two digit visual current meter; Upgrade options available Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Features:

200-240V 16/20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)
Provides a redundant power option for critical networking equipment with a single input power cord
2 digit display reports output power consumption in amps
1U horizontal rackmount form factor; 14.8 in. / 37.6 cm depth
10 outlets (8 C13, 2 C19)
Set of two C20 inlets support connection to separate PRIMARY and SECONDARY power sources
Two 12ft / 3.6m C19 to C20 power cables included
ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
Super-fast switchover between primary and secondary power sources occurs in 2-5 milliseconds
Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
Outlets are factory programmed for sequential turn-on at 250 milliscond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
Front panel LEDs confirm power availability on both input lines

Typical Applications

Ideal means to provide single-corded networking equipment with a redundant power option
Package Includes

Metered PDU with ATS Support
User manual with warranty information

PDUMH20HVAT

Specification:

PDU Type Auto-Transfer Switch; Metered
OUTPUT
Output Capacity Details 3.3kW (208V input), 3.5kW (220V input), 3.7kW (230V input), 3.8kW (240V input), 3.2kW (200V input); 20A maximum (Agency de-rated to 16A continuous)
Frequency compatibility 50 / 60 Hz
Output nominal voltage 200-240V nominal, single phase
Outlet quantity / type 8 IEC-C13, 2 IEC-C19
Outlet Type IEC-C13, IEC-C19
Customized load management receptacles Adding SNMPWEBCARD accessory offers upgrade path to switched PDU (only C13 outlets are switchable upon upgrade); SNMPWEBCARD also can be inserted temporarily as a configuration tool to custom program power-on and power-off C13 outlet sequences with user-specified time delays in response to loss and restoration of primary input
INPUT
PDU Input Voltage 200; 208; 220; 230; 240
Maximum Input Amps (A) 20
Maximum Input Amps (A) Details Agency de-rated to 16A continuous
PDU Plug Type IEC-320 C20
Input cord details Includes two 12ft / 3.6m C19 to C20 cables
Phase Single-Phase
LEDS ALARMS & SWITCHES
Switches Toggle switch near digital display enables the setting of "HI" for 220, 230 or 240V nominal applications or "LO" for 200 or 208V applications
Front panel LEDs 8 front panel LEDs display power on - off status for each C13 outlet, plus 2 LEDs for power status on Primary and Secondary input connection. Digital current meter display shows the amount of power consumption in amps for entire PDU output.
PHYSICAL
Shipping Dimensions (HWD/in) 5.3 x 23.6 x 21
Shipping Dimensions (HWD/cm) 13.5 x 59.9 x 53.3
Shipping weight (lbs) 19.98
Shipping weight (kg) 9.1
Unit Dimensions (HWD/in) 1.72 (1U) x 17.3 x 14.8
Unit Dimensions (HWD/cm) 4.4 x 43.9 x 37.6
Unit weight (lbs) 10.3
Unit weight (kg) 4.7
Material of construction Steel
Style Rackmount
Form factors supported 1U rackmount
PDU Form Factor Horizontal (1U, 2U, etc)
ENVIRONMENTAL
Relative Humidity Up to 95% (non-condensing)
SPECIAL FEATURES
Appearance Black 1U rackmount steel chassis
CERTIFICATIONS
Certifications Tested to UL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico), RoHS Complaint
WARRANTY
Product Warranty Period (Worldwide) 2-year limited warranty