Smart-e 4K-TX910-WP Wall Plate to Transmit HDMI and SVGA up to 150m HDMI Wall Plate VGA Wall Plate

Description:

The Smart-e 4K Wall Plate includes 1 VGA + audio input which gets digitized and scaled to 1080p and also 1 HDMI input which can handle resolutions up to and including 4K UHD. The wall plate then has a switch built in, the input which is selected is then sent over Cat 6 via HDBaseT. The 4K-910-WP is a flexible and cost effective solution to extending HDMI, RGBHV and stereo audio together with RS232. Consisting of a transmitter/receiver pair, the input signals can be connected via a convenient wall plate (double gang UK size), whilst the receiver unit can be installed up to 150m away. The 4K-TX910-WP is a two input wall transmitter capable of accepting HDMI signals up to 4K resolutions together with analogue RGBHV signals up to 1080p. An internal scaler will digitise and convert the RGBHV signal to HDMI 1080p and embed the audio. Selection of the signal type can be via the Auto sense feature, RS232 or button control on the wall plate. Power to the wall plate is derived from the Cat 6 cable provided by the remote receiver unit. The 4K-TX910-WP can connect to any other product in the 4Konnect range as an extender or pre-switch into a matrix. As an extender the 4K-RX900 can be used to receive and convert back to a single HDMI connection to the display whilst allowing for RS232 and IR passthrough. This solution would be ideal in meeting rooms, conference rooms or suites where you have multiple inputs from various attendees or management who may need to share their screen with the rest of the attendants. Alternatively, this could be installed in the home to extend any SVGA or HDMI signal from one point in the house to a large screen.

Features:

•Resolutions up to and including 720p, 1080p, Ultra HD 2K and 4K resolutions - HDMI input
•Resolutions up to and including 720p and 1080p - RGBHV (VGA)
•Supports HDMI up to 297 MHz TDMS clock
•Digitizes and scales RGBHV input to 1080p
•Embeds analogue audio when digitizing
•150m Cat6 extension—HDBT (receiver dependant)
•IR Pass-through
•Transparent RS232 pass-through
•RS232 control
•Uses easy to install single CAT5e-8 cable
•HDMI, DVI-D & DisplayPort formats
•High ground loop immunity
•1 CAT 6-8 STP/FTP cable
•Supplies remote power to wall plate
•Uses HDBaseT technology
•Button control & auto sense
•Compact receiver units

Typical Setup Extending a Laptop and Blu-Ray Player

Specification:

•Signal Types
HDMI, DVI, DisplayPort, Multimode
•Formats
HDMI w/Deep Color 3D, 4K, 2K
•Content Protection
HDCP V1.2
•Connectors
HDMI Type A Female
HD15 Socket
3.5mm IR Connector(Not for Audio use)
•Audio
Embedded audio in HDMI
In digital formats
Dolby Digital® Plus
Dolby®
TrueHD
DTS-HD High Res
DTS-HD
Master Audio™, up to 8chPCM
•Cable Types
CAT 5e, CAT 6/6e, CAT 7, STP, FTP
•TV & PC resolutions
480, 576, 720, 1080 p & i
640x480 through to 1920x1200
•Signal formats
RGBHV, YPrPb, Y/C, CV
•DDC/EDID
Transparent connection
•Power
Voltage - 24V DC
Connector - 2.1mm DC locking jack
Max. current - 200mA per unit
Power - 5Watts