CLK-4U2FSB-10KM - Rose - CrystalLink USB2.0 Fiber Extender, 2 Port single mode, USB 2.0 (Fibre USB Extender)
CLK-4U2FSB-10KM Front & Rear
Description:
CrystalLink USB Fiber is an ideal extender for all USB devices. The extension of USB signals is accomplished with the installation of standard single-mode or multi-mode fiber cable. You can fully operate and control all of your USB devices from as far away as 6 miles using single-mode fiber cable. There are several reasons to deploy your USB device at remote locations. You can increase desk and floor space, prevent theft, avoid hazards, centralize power, heating, and cooling, and many more possibilities. If additional USB devices are needed, USB hubs can be attached to the receiver model to connect as many as 11 USB devices and 3 hubs. All USB devices are plug and play ready with CrystalLink USB Fiber. With a wide range of applications, it is ideal for use in industrial control areas, digital signage, connecting web cameras, USB device printing, and scanning and storage. It supports all major operating systems.
Features:
-Single-Mode and Multi-Mode models available
-Supports USB 2.0 (high-speed) and USB 1.1 (low and full speed)
-Extend USB device up to:
902 feet (275m) over 62.5 / 125m Multi-Mode fiber
1640 feet (500m) over 50 / 425μm Multi-Mode fiber
6 miles (10km) over Single-Mode fiber
-Operates with USB 2.0 high-speed host controllers and USB 1.1 host controllers.
-Standard USB hubs can be used to increase the maximum number of connected USB devices to 14 (3 USB hubs and 11 USB devices)
-Up to 500 ma of power is available at each USB port for powering high-power USB devices
-Plug-and-Play installation, no configuration or set-up needed.
-Installation consists of:
1.Connecting the receiver to your USB device(s)
2.Connect the transmitter to your computer’s USB port
3.Connect the transmitter to the receiver with fiber optic cable
4.Apply power and the installation is complete
CLK-4 Fiber EXTENDER General setup picture
Specification:
Dimensions:
Width Depth Height
Transmitter (in) 3.94 2.99 1.02
Receiver (mm) 100 76 26
Shipping Weight 2.2 lbs (1.0 Kg)
Distance
902 feet (275m) over 62.5 /125μm Multi-Mode fiber
1640 feet (500m) over 50 / 425μm Multi-Mode fiber
6 miles (10km) over 9μm Single-Mode fiber
Connectors:
Local
USB Type B
Interconnect–RJ45
Power–Optional +5VDC
Remote:
4-USB Type A
Interconnect–RJ45
Power– Required +5VDC
Receiver output 500 ma per USB output port (4)
Indicators:
Transmitter:
Power-Blue LED
Link–Green LED
Host–Green LED
Activity– Amber LED
Receiver:
Power– Blue LED
Link–Green LED
Host–Green LED
Activity–Amber LED
Device–Green / Orange LED
Environment
Operating Temp. 32°F-122°F (0°C-50°C)
Storage Temp.-4°F-158°F (-20°C-70°C)
Humidity 20%–80% non-condensing
Approvals:
FCC Class B, CE Class B, IC Class B