X-DVIPRO-DL-UK ADDERLINK X-DVIPRO Dual Link DVI & USB Extender with Audio. Dual link DVI and transparent USB over a single CATx cable, Transmitter and Receiver Set ( Adder DVI Extender ) XDVIPRODL

X-DVIPRO-DL-UK

Description:

The ADDERLink X-DVI PRO DL is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station, whilst maintaining the same user experience. It can transmit a dual link video stream, USB 2.0 and analog audio over a single CATx cable. Allowing 50 meter extension distance with a 2560 x 1600 @ 60Hz maximum resolution, USB 2.0 Low and Full speed, Keyboard, mouse, tablet and touch screen, this Dual Link XDVIPRO extender is an ideal product for extending WQXGA 2560x1600, dual link digital video streams, USB 2.0 and analog audio over a single CATx cable. Areas of use include medical imaging, control rooms, post production suites and broadcast control solutions

Features:

Dual Link resolutions, Real Time Control
The X-DVI PRO DL allows you to remote your monitor with resolutions up to 2560x1600 @60Hz up to 50 meters away from your computer. Using a visually lossless technique, no visible artefacts or latency are introduced allowing you to be certain of quality and control.

50 meters over a single CATx cable
Video, USB 2.0 (low and full speed) and audio pass along a single cable, providing up to 50 meters of extension. Distance is dependent upon video resolution, CATx cable type and the number of connection breaks for patch panels and wall plates. See table below

USB 2.0
Enables connection of any human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks, 3D explorers and mass storage devices. Full speed (12 Mbps) isochronous devices are also supported.

Power efficiency
The X-DVI PRO DL extender is designed to be highly power efficient and consumes <6 watts per point.

EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and Play
The AdderLink X-DVI PRO DL extender is delivered in a zero config state so you can plug the units in and start working with them straight away. There is no need for drivers or software to be installed.

Analog Audio
Stereo CD quality (stereo channel 16 bit sampled at 44.1 kHz) is available to transfer audio from local to remote for line out.

Software compatibility
All known operating systems.

Built to last
Adder Technology have a well-earned reputation for creating products that perform well. The AdderLink X-DVI PRO DL is no exception and features tough, yet lightweight metallic enclosures to ensure they can easily withstand everyday treatment. The internal components and external connectors too are selected for their reliability in addition to their high performance characteristics.

X-DVIPRO-DL-UK pmvd424

Specification:

Important extension distance Information

Recommended cables are CAT7 shielded foiled twisted pairs:
Daetwyler 7702 Flexible patch cable
Daetwyler 7120 Bulk cable
Category 5e (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances

Resolution table

2560 x 1600 @ 60Hz CAT7 - 50 meters
2560 x 1600 @ 60Hz CAT6a (shielded) - 50 meters
2560 x 1600 @ 60Hz CAT5e (shielded) - 50 meters
2560 x 1600 @ 60Hz CAT7 - 40 meters

Distances are achieved using single lengths of trunk/bulk cable. For each break/patch
connection reduce distance by 5 meters. Preferably patch cables should be of type
CAT7a and less than 2 meters. Patch cables over 2 meters must be CAT7a. The maximum
extension distance for USB is 50 meters including connections to and from the X-DVI PRO
DL independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5
meters of cable length. This needs to be taken into consideration when planning your system.

Hardware compatibility
All computers with DVI-D, USB and Audio
- requirement dependent.


Computer connections Transmitter (TX)
DVI-D, Audio 3.5mm in, USB type B.
Computer connections Receiver (RX)
DVI-D, Audio 3.5mm out, USB type A x 4.

Physical design
Compact case, robust metal construction
120mm/4.7” (w) x 75mm/3” (d) x
26mm/1” (h) 320g/0.7lb.

Power
2.5mm DC jack (power adaptor included),
100-240VAC 50/60Hz, 0.4A, input to
power adaptor, 5VDC 12.5W output from
power adaptor.

Operating temperature
0 to 40ºC / 32 to 104ºF.

Approvals
CE, FCC.