Smart-e 4K-710 70m HDBaseT Extender Pair for HDMI , RS232 and Infrared. Resolutions 4k,2k, 1080p@60Hz, 3D fully HDCP compliant
Description:
The 4K-710 is a transmitter and receiver pair designed to extend HDMI, DVI or DisplayPort, together with and bidirectional IR signals and RS232 communication over a single twisted pair CAT 5e-8 cable. The units use HDbaseT Lite technology to extend 12 bit Deep Colour 3D, 4K and 2K resolutions together with 1080p @60Hz Infra-Red pass-through is available via an external IR receiver (SM-EYER) in the 4K-RX800 and external IR emitter (SM-LED) connecting to the 4K-TX800. The IR is extended through the same CAT 5e-8 cable together with RS232 up to 70m. Each box has fixing holes to facilitate ease of installation and multiple units can fit side by side on a 1U 19 rack shelf. 70m HDMI Extender
Features:
HDMI, DVI & Display Port
HDMI, Deep Colour, 3D, 4K & 2K resolutions
3D compatible
Distributes signals over a single 70m CAT 5-8 cable
HDCP compliant
Infra-red signal passthrough
Wide bandwidth IR transmission
Locking DC connector
Supports resolutions up to 4K
High ground loop immunity
HDBaseT Lite
Specification:
Signal Types - HDMI, DVI, DisplayPort Multimode
Types
Embedded audio in HDMI
Formats
HDMI w/Deep Color 3D, 4K, 2K
Digital Formats
Dolby Digitalฎ Plus Dolbyฎ, TrueHD, DTS-HD High Res, DTS-HD, Master Audio, up to 8chPCM
Content Protection
HDCP V1.2
Connector
HDMI Type A Female
Cable Types
CAT 5e, CAT 6/6e, CAT 7, STP, FTP
TV & PC Resolutions
480, 576, 720, 1080p & 1080i
640x480 through to 1920x1200
Power
Voltage 5V DC
Connector 2.1mm DC locking jack
Max. current 200mA per unit
HDbaseT pair 4 Power 5Watts
Dimensions Control
Height 29mm
Width 83mm
Depth 116mm
Weight 100g
Control
IR signal - 30-500kHz
Ethernet pass-through - No
RS232 pass-through - <115kbaud
CEC pass-through - Yes