EZ-RJ45-CAT6 Cat6 EZ-RJ45 Crimp Connectors ( 100 Pack )

EZ-RJ45 Crimp plug showing cable cores going through before trimming.

Description:

EZ Unsheilded RJ45 Connectors The EZ connectors meet the specifications of CAT6. The connector has a simple one-piece construction with no terminal strips or inserts. this allows the technician to be connected through the connector cable just to the head end of the connector. Thus, the wiring of the cables are more easily visually checked before crimping. To further optimize the electrical performance, the technician can pull the connector firmly over the cable sheath. Thus, the cable is secure at the back of the connector and the distance between the twist and the contacts can be minimized. Especially in low light levels and awkward spaces it’s hard to see what you’re doing, to cut to length correctly, and poke the wires into the right apertures. The EZ connector simplify your on site termination and save time. Easy visual checks and proper fitting offer greater reliability and real cost savings.

Features:

- No need to trim the outer jacket to an exact length, just pull the wires through until it is correct.
- Easier to see the wire colours, and make sure the wires are correctly placed.
- With diagonal cuts the wires get easier into the guides in the plug without error.
- No problems with some wires end up too short to go to the end of the guide.

- Insert wires straight through the EZ-RJ45 Modular Plug.
- The plug’s simple on-piece design eliminates a loading bar and liners.
- Verify proper wiring at a glance.
- Modular Plugs are guaranteed for life!

Specification:

EZ-RJ45-CAT6 CRIMP CONNECTOR - 1 Piece




REQUIRED EZ CRIMP TOOLING:

- Use the EZ-RJ45 Crimp Tool with EZ-RJ45® CAT5e and CAT6 Modular Plugs for an easy modular connection system.
- Replacement trimming blades are available.


* This product is currently supplied on a special order basis.