S4K-16x16 - Smart-e - 16 input X 16 Output 4K HDMI Matrix Switch with HDMI v.1.4 features and fully HDCP compliant. Resolutions are up to 4Kx2K (2160p), 3D and Deep Colour ( Smart-e 4K Matrix Switch )
S4K-16x16
Description:
The S4K-16x16 is professional 16x16 matrix switch with PoH. Supporting 16 HDMI inputs. Output supported 16 x HDMI and 16 x HDBASET(with PoH). (16 Outputs, each consist of simultaneous video to HDMI and HDBaseT) The S4K-16x16 is based on the HDBaseT standard and supports full 4K resolution HDMI Video with embedded EDID and PoH, RS-232, Ethernet and bi-directional IR, all over a single Category cable. With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed from any 16 Inputs to any of the 16 outputs. The Switcher is certified as being conformed to the standards of CEC, ARC and HDCP 2.0 compliant, full HD 4K 2K HDMI V1.4 a 3D formats, data rates upto 6.75Gbps. Supports UXGA / WUXGA / DVI 1920x1200 resolution to any HD displays. Using IR remote the switcher’s HDBaseT Extender Transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT Output and our HDBaseT Receiver allows you to connect a display in a remote location. The EDID management can be selected between seven different modes. Control is provided via Front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser).
Features:
Key Features
- Fully HDCP compliant, 3D compatible HDMI matrix
- Resolutions up to 4K, 3D, Deep Colour
- Transmits via a single 100 metre CAT cable
- RS232 & IR pass-through & control
- EDID management
Other Features
- HDMI, DVI & DisplayPort formats
- HDCP 2.0 & HDMI 1.4 compliant
- Individual IR control from each display
- HDMI inputs with Cat6 STP outputs
- Resolutions up to 4096 x 2160 @ 30Hz
- 1080p and 3D compatible
- EDID management - presets and learning
- Supports Deep Colour (10 & 12 bit)
- RS232 control & pass-through
- Front panel display and control
- IP Control
- Compact 4U 19" rack mounting
- Optional SmartiP upgrade Up to 100 metres of CAT 5e-8 cable
- De-embedded audio output
- 48V POH to receivers (remote power )
- Local HDMI outputs
- Optional audio embedding on input
- CEC compliant
- Data rate of 340MHz
- 6.75Gbps overall bandwidth
- 3 year warranty
S4K- Matrix typical setup
Specification:
VIDEO
Signal Types: HDMI,DVI,DP++, HDBaseT, 3G-SDI
Formats: 1080p @ 60Hz with 10 & 12 bit Deep Colour, 3D, 4K , 2K & DVI, HDCP compliant, PC to WUXGA.
Analogue RGBHV, YPrPB. Y/C. PAL or NTSC
Content Protection: HDCP V2.0
Connectors: HDMI Type A , RJ45, HD15, BNC
Cable Types: CAT5E, CAT5/6A, CAT7, STP,FTP
TV Resolutions: 480,576,720,1080p @ 60 Hz
PC Resolutions: 640 x 480 up to 1920 x 1200
AUDIO & POWER
Types: Embedded Audio
Digital Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus Dolby True HD, DTS, DTS-HD High Res, DTS HD Master Audio.
Voltage: 110-240 AC 50/60 Hz
Connector: IEC C14
Fuse Rating: 1 AT
Power: 100W ( check variant )
DIMENSIONS
Height: 4U
Width: 19” rack mounting
Depth: 484 mm
Weight: 6.75 Kg ( check variants)
CONTROL
IP: TCP/IP
IR signal: 30-50Hz
RS232: 19200 bps
RS232 connector: Sub-miniature D9 socket