APC AP7152B Inline Current Meter

AP7152B

Description:

The APC by Schneider Electric In-Line Current Meter monitors current to devices in the data center. The Current Meter has a sensor that measures the current that it and its attached devices use. The Current Meter can be monitored through Web, Telnet, SNMP, SSH, or StruxureWare Data Center Expert® interfaces. Digital display: A digital display shows aggregate current being used by the Current Meter and its attached devices. Power cords: Each 0.91 m (3 ft) power cord terminates with an IEC 309, 16-A, 2P+PE connector.

Features:

Network management
Provides proactive power and environmental management via web and/or SNMP

Local and web-based monitoring
Status available to customers both in the data center and remotely

Multiple mounting methods
Allows for standardization on one product for use in different environments

Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Remote Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements

Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)

Flash Upgradeable
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)

Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections

Specification:

Electrical
Input connector IEC 309, 16 A, 2P+PE
Nominal input voltage 230 VAC
Input frequency 50/60 Hz
Acceptable input voltage ± 10% of nominal
Maximum input current (phase) 16 A
Output connector IEC 309, 16 A, 2P+PE
Maximum output current (phase) 16 A
Nominal output voltage 230 VAC
Cord length 0.91 m (3.00 ft)
Physical
Dimensions (H x W x D) 4.39 x 17.78 x 13.97 cm
(1.73 x 7.00 x 5.50 in)
Shipping dimensions
(H x W x D)
24.63 x 33.02 x 18.54 cm
(9.70 x 13.00 x 7.30 in)
Weight 1.51 kg (4.05 lb)
Shipping weight 2.03 kg (5.45 lb)
Environmental
Elevation (above MSL)
Operating
Storage
3000 m (10,000 ft)
15 000 m (50,000 ft)
Temperature
Operating
Storage
–5 to 45°C (23 to 113°F)
–25 to 65°C (–13 to 149°F)
Humidity
Operating/Storage 5 to 95%, non-condensing
Compliance
Safety VDE, EAC, CE
EMC EN 55022, EN 55024, VCCI, ICES-003, FCC Part 15,
AS/NZS CISPR22