IP-AT-120-04-2XS1 iPower ATS - Auto Transfer Switch, 2x 16AC20 Input, 10x C13 Output. Remote access & display,

/IP-AT-120-04-2XS1

Description:

New addition high speed ATS from iPower IP-AT-120-04-2XS1 Allows 10xC13 devices to be supplied by either of the 2 x 16 A rated C20 inputs. iPower ATS (Automatic Transfer Switch) provides reliable and precise management of primary and secondary AC power feeds for equipment with a single power connection. When connected to separate feeds the ATS provides automatic or manual selection of either maintained incoming single-phase supply. The ATS can be remotely managed using the proven iPowerTM platform, with clear and precise on board instructions on setting up parameters and creating alerts. From the internal GUI, the user can view and control the selected feed, as well as monitoring the status of the second supply. In addition, the iPower ATS has a powerful 1% tolerance energy meter providing reports and alarms for a range of energy metrics including: Peak Amps, Peak Volts, Volts AC, Amps AC, VA, Frequency, Watts, Power Factor, Internal Temperature & kWh.

Features:

• iPower ATS is a new generation intelligent Automatic Transfer Switch, that exceeds the industry standard 21ms transfer time to Switching speed: >8mS <15ms L1 plus N. and comes with remote management and analytical tools, to put you in control of your power source infrastructure.

• iPower ATS has an easy-to-use HTML graphical interface, with the ability to set SMS and Email alarms for all critical parameters.

• iPower ATS will work in conjunction with other iPower products to create a fully flexible monitoring system allowing for individual racks to have switching only, or switching with supply management, rack security and environmental capabilities.

• UK Made and supported

Specification:

19” 1u ATS 16A
Case size: 19” 1u 300mm deep
Case material: Mild steel
Finish: Black powder coat as standard, other colours to order
Input: 2x IEC320 C20 (Supply A & B)
Output: 10x IEC320 C13 (Type F)
Protection: 2x 16A thermal trip (32A Version only)
Indicator: 3x LEDs and reset buttons.


Earthing: M6 Earth stud to rear.
Rating: 16A @ 240V AC 50/60Hz
Standards: Conforms to EN60950-1:2005 2nd edition + AM1 & AM2
WEEE: Compliant
RoHS: Compliant
CE: Compliant
Opp Temp: -10° to +55°C