RTL-5301281 Rittal VX IT Partition in one-piece, slide-in HD: 2000x1200 mm, zinc plated ( RACK SIDE DIVIDER )

VX-IT Partition 1 piece

Description:

Partition for VX IT. For rack mounting, suspended between two VX IT enclosures. VX_IT 5301.281 Product description For rack mounting, suspended between two bayed enclosures. With one Ø 40 mm hole in the left-hand and right-hand corner areas for inserting cables, conduits etc. These drilled holes may be sealed with the enclosed cover caps.

Features:

Benefits
Simply slides into position
Material
Sheet steel, zinc-plated
Supply includes
Partition
2 cover caps
To fit
Enclosure type: VX IT
Height: = 2,000 mm
Depth: = 1,200 mm

Specification:

Assembly instruction
A baying gap of 3 mm is required to insert the partition
Note
Use baying connector, external, 3 mm
Not suitable for use in conjunction with a baying seal
Any seals that may be present must be removed prior to installation
IP protection category to IEC 60 529
IP 20 (with fitted cover caps)
Packs of
1 pc(s).
Net weight
31 kg
Gross weight
32 kg
PCF per pack (cradle-to-gate)
121.9 kg CO2 eq (Cat B)
Note on PCF category
Category B: PCF value (cradle-to-gate) based on the product weight, approximately calculated and self-declared
Customs tariff number
94039910
EAN
4028177954830
ETIM 9
EC002525
ECLASS 8.0
27189234
Product description
Partition, one-piece, insertable for VX IT, suspended between two bayed enclosures. For enclosure height 2,000 mm, for enclosure depth 1,200 mm, sheet steel, zinc-plated