VE8962R - ATEN - True 4K HDMI over IP Receiver with PoE (ATEN AV Receiver)

VE8962R Front & Rear

Description:

The VE8962 is a flagship HDMI-over-IP video extender that delivers pristine True 4K resolution with ultra-low latency over both Ethernet and fiber optic connectivity, making it ideal for versatile digital signage requirements. Whether in point-to-point or multipoint-to-multipoint installations, the VE8962 integrates seamlessly into existing networks, delivering uncompromised audiovisual content and control signals via HDMI, audio, USB, RS-232, and IR interfaces.

Features:

• 4K60 4:4:4 Video with HDR10 support
• Long-Distance Transmission up to 100m over Cat 5e/6 or 10km over fibre
• Ultra-Low Latency for smooth AV streaming
• Flexible AV Distribution – extender, splitter, matrix and video wall modes
• Video Wall Support – up to 80 displays (8 × 10)
• Built-in 4K Scaler for optimised display output
• Redundant Connectivity – copper, fibre and PoE+ support
• USB 2.0, IR and RS-232 signal extension
• Secure Streaming with AES-256 encryption and HTTPS
• Web GUI Management with scheduling and drag-and-drop layouts
• HDCP 2.2/2.3 Compliance
• Daisy-Chain Support for up to 30 receivers

VE8962R

Specification:

Video Input
Max. Distance 5m
Impedance 100 Ω
Interfaces 1 x HDMI Type A Female (Black)
Video Output
Interfaces 1 x HDMI Type A Female (Black)
Impedance 100 Ω
Max. Distance 5m
Video
Max. Data Rate Average: 500 ~ 800Mbps
Compliance HDMI
HDCP2.3 & HDCP2.2 Compatible
Max. Resolutions / Distance Up to 4K@100m (Cat 5e/6, point to point)

*4K supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Video Compression Optimized JPEG2000, proprietary codec
Latency ~ 1 frame
Audio
Output 1 x HDMI Type A Female (Black)
1 x Mini Stereo Jack Female (Green)
Connectors
Unit To Unit 2 x RJ-45 Female ( x1 with POE+, x1 with Daisy chain) or
1 x SFP+ socket (SFP+ module excluded)
Power 1 x DC Jack (Black) with locking or
1 x RJ-45 (Power Over Ethernet, POE+)
Control
IR Channel 2 x Mini Stereo Jack Female (bi-directional, Black)
RS-232 Connector: 1 x Terminal Block, 3 pole
Baud Rate: 19200, Data Bits:8,
Stop Bits:1, no parity and flow control
USB Channel 2 x USB Type A Female (Black)
Contact In Connector: 1x Terminal block, 2pole (Contact IN + GND)
Pushbuttons
Operating Mode Selection 3 x Push buttons for LCM operation
LEDs
Power 1 x DC IN LED
1 x POE LED
Power Consumption DC5V:9.1W:68BTU/h
POE:11.38W:79BTU/h

Note:
● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Environmental
Operating Temperature 0 - 40°C
Storage Temperature -20 - 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.74 kg ( 1.63 lb )
Dimensions (L x W x H) with bracket 17.02 x 14.69 x 3.00 cm
(6.7 x 5.78 x 1.18 in.)
Dimensions (L x W x H) without bracket 16.60 x 12.49 x 2.90 cm
(6.54 x 4.92 x 1.14 in.)

Input Resolutions 3840 x 2160p 24 / 25 / 30 / 50 / 60 Hz (4:2:0) 1280 x 1024 @ 60 / 75 Hz
4096 x 2160p 24 / 25 / 30 / 50 / 60 Hz (4:2:0) 1280 x 800 @ 60 Hz
1080p 24 / 25 / 30 / 50 / 60 Hz 1024 x 768 @ 60 / 70 / 75 Hz
1080i 50 / 60 Hz 800 x 600 @ 56 / 60 / 72 / 75 Hz
1920 x 1200 @ 60 Hz (Reduced Blanking) 720 x 480 @ 60 Hz (4:3 / 16:9)
1920 x 1080 @ 60 Hz 720p 50 / 60 Hz
1680 x 1050 @ 60 Hz 720 x 400 @ 70 Hz
1600 x 1200 @ 60 Hz 640 x 480 @ 60 (4:3)/ 67 / 72 / 75 Hz
1440 x 900 @ 60 Hz 576p 50 Hz (4:3 / 16:9)
1400 x 1050 @ 60 Hz 480p 60 Hz (4:3 / 16:9)

Click here for further information